How To Remove A Triple Wide Mobile Home?

Removing a triple wide mobile home is no small task. These large, sectional structures are more complex than single or double wides due to their size, weight, and connection systems. Whether you're clearing land for a new build or disposing of an old, unlivable unit, proper planning is key to doing it safely, legally, and efficiently.

A triple wide mobile home typically consists of three connected sections, each moved separately. Unlike smaller mobile homes, removing one of this size involves disconnection from utilities, structural separation, permits, transportation logistics, and often demolition. Explore more about "How To Remove A Triple Wide Mobile Home?"

Initial Preparation Before Removal

Get the Right Permits

Before anything, check with your local county or city office about permits required for mobile home removal. Most municipalities require:

• Demolition or removal permits

• Utility disconnection verification

• Transportation authorization (if relocating the unit)

Operating without permits can lead to fines, delays, or legal issues.

Disconnect All Utilities

Have a licensed professional disconnect:

• Electricity

• Water and sewer lines

• Gas (natural or propane)

This must be done before any removal work begins to prevent accidents or code violations.

Evaluate the Mobile Home’s Condition

Determine whether the structure is in good enough condition to move and resell or if it must be torn down and scrapped. Factors to consider:

• Roof condition

• Frame integrity

• Age and code compliance

• Pest or water damage

If it's too far gone, demolition is usually the better option.

Step-by-Step Process of Removal

Separate the Sections

Once utilities are off and permits are ready:

1. Remove skirting, decks, and additions.

2. Cut seals and bolts that hold the three units together.

3. Carefully split the home into three sections using jacks and lifting equipment.

Professional movers are highly recommended here due to the weight and risk involved.

Moving the Sections Off-Site

Each section must be loaded onto a flatbed trailer. Make sure:

• Roads are accessible for wide-load vehicles

• A licensed hauler is involved

• You have state transport permits (especially for inter-state moves)

Wide load escorts may also be required depending on the route.

Demolishing On-Site (If Necessary)

If the home can’t be moved:

• Hire a licensed demolition contractor

• Use heavy machinery like excavators to tear it down

• Sort debris into recyclable and waste materials

• Arrange for dumpster rental and proper disposal

Hazardous materials (asbestos, lead paint, old propane tanks) should be handled by certified specialists.

Post-Removal Cleanup and Site Prep

After removal or demolition:

• Fill in any holes left from tie-downs or plumbing

• Level the site if building again

• Contact local waste management to confirm proper disposal was done

• Notify local authorities that the structure has been officially removed

Cleaning up the site properly is essential for resale or construction purposes.

Conclusion

Removing a triple wide mobile home is a large-scale project that requires careful planning, the right permits, and professional help. Whether you're relocating, selling, or demolishing, following the correct steps ensures safety, compliance, and efficiency. With the right approach, you can turn a complicated task into a smooth, successful process.